Keep Things Clean: How To Give Your Vacuum Cleaner The Care It Needs

3 Minutes Posted on:

If you're like most people, you depend on your vacuum. After all, it's your vacuum that keeps dirt, food, and pet hair out of your carpets. Unfortunately, many people take their vacuum cleaners for granted. If you do, it's time to make some changes. The best way to keep your vacuum up and running is to give it the right maintenance and repairs. Here are four steps you need to take to avoid problems with your vacuum cleaner.

Clear the Blockages

Each time you use your vacuum, particles of dirt and fiber get stuck in the hoses. You might think that everything moves through to the bag or canister, but that's not the case. The dirt and fiber that gets trapped in your vacuum need to be cleaned out from time to time. If it's not, troublesome blockages can buildup. When that happens, your vacuum won't work properly. In fact, your vacuum may overheat from the blocked passages. That's why you need to clean the hoses on a regular basis. To avoid problems, remove the hoses and clear the blockages at least once a week. 

Free the Beater Bar

If you haven't checked your beater bar in a while, now's the time to do that. Long hair and fiber can get wrapped around the beater bar. Once enough hair and fibers are tangled up, your beater bar won't be able to stir up enough dirt for your vacuum. That means, your carpeting won't get as clean as it should. Not only that, but germs and bacteria can get trapped in the fibers. The best way to avoid that is to clean your beater bar at least once a month. If you have a hard time cleaning the beater bar, take your vacuum in for professional service. 

Focus on the Filter

If you use your vacuum on a daily basis, your filter will fill up quite quickly. If you're running your vacuum with a dirty filter, you're at risk for a couple of problems. First, a dirty filter doesn't allow enough air to flow through your vacuum. The lack of airflow can cause your vacuum to overheat. Second, a dirty filter allows allergens and dust to escape into the air. That means the air quality in your home will be undermined. Protect your vacuum and the air you breathe. Keep your filter clean. 

Replace Old Belts

Finally, If you can't remember the last time you had the vacuum belts replaced, it's time for an inspection. Over time, your vacuum belts can wear out. Worn-out belts can cause your vacuum to lag. If left alone for too long, your belts will break. When that happens, your vacuum will stop working. To prevent those problems, have the belts on your vacuum replaced at least once every three months.

If you need help with your vacuum cleaner, contact a vacuum cleaner dealer in your area.

• Tags: • 481 Words

About Me

Like New Again: A Restoration Blog When you first come home to a house that has been ravaged by fire or flood waters, it can be overwhelming. You see carpets that were once plush and luxurious simple covered in ash or mold. Drywall is bubbling, and your wood floors are warped. Amazingly, restoration and repair companies can whip your home back into livable condition, making it like new again. This website was created to share knowledge and insight into the restoration process. If you're not sure whether hiring a restoration service is worth it, you should have a better idea after reading a few of our articles. We'll also share pieces on the various services repair companies offer, from carpet cleaning to drywall replacement.